Honda EU10iT1, Manual

Page: 20 / 138

2-5
dummyhead dummyhead
SERVICE INFORMATION
LUBRICATION & SEAL POINT
Material Location Remarks
Use molybdenum oil solution
(mixture of the engine oil and
molybdenum grease in a ratio
of 1:1)
Piston outer surface and piston pin hole
Piston pin outer surface
Piston ring entire surface
Cylinder inner surface
Crankshaft pin
Connecting rod big and small end inner surface
Engine oil Crankshaft gear teeth
Rocker arm roller entire surface
Valve lifter roller entire surface
Camshaft roller entire surface
Camshaft gear teeth, journal, cam lobes and
decompressor area
Valve lifter journal and slipper surface
Rocker arm journal and pivot
Valve stem sliding surface and stem end
Valve spring entire surface
Rotor nut threads and seating surface
Connecting rod bolt threads and seating surface
Governor weight holder gear teeth
Each bearing rotating area
Multi-purpose grease Each O-ring entire surface Insulator, oil level switch
Oil seal lips
Threebond
®
1206, 1216E,
1207B, or equivalent
Cylinder block oil case mating surface See page 15-4
Cylinder block crankcase side cover mating surface See page 14-6
Threebond
®
1207B, or
equivalent
Head cover mating surface
Breather tube outer surface
See page 13-3
LOCTITE® 638, or equivalent Limiter cap inside