Honda EU10iT1, Manual

Page: 86 / 138

9-5
dummyhead dummyhead
IGNITION SYSTEM
FAN COVER DISASSEMBLY/
ASSEMBLY
Remove the following:
– Air cleaner (page 6-4)
– Recoil starter (page 10-2)
IGNITION PULSE GENERATOR AIR
GAP ADJUSTMENT
Insert a feeler gauge [1] between the ignition pulse
generator [2] and the rotor projection [3].
If the air gap is out of specification, loosen the bolts (5 x
12 mm) [4] and push the ignition pulse generator firmly
toward the rotor and tighten the bolts to the specified
torque.
FAN COVER
REFLECTOR SET COLLAR (3)
FAN COVER COLLAR (3)
IGNITION PULSE GENERATOR AIR GAP:
0.4 – 0.6 mm (0.016 – 0.023 in)
TORQUE: 6.0 N·m (0.6 kgf·m, 4.4 lbf·ft)
0.4 – 0.6 mm
(0.016 – 0.023 in)
[4]
[1]
[3]
[2]