Honda EU10iT1, Manual

Page: 78 / 138

8-11
dummyhead dummyhead
GENERATOR/CHARGING SYSTEM
ROTOR REMOVAL
• Do not strike any part of the rotor when removing it.
The rotor may be damaged.
Hold the rotor [1] with a commercially available strap
wrench [2].
Remove the following parts:
– Bolt (6 x 16 mm) [3]
– Washer (6 mm) [4]
– Starter pulley [5]
– Two bolts (6 x 16 mm) [6]
– Cooling fan boss [7]
– Cooling fan [8]
Remove the nut (10 mm) [1].
Remove the rotor [1] using the special tool.
[2]
[1]
[7]
[5]
[3]/[4]
[6]
[8]
[1]
TOOL:
FLYWHEEL PULLER [2]
07935-8050004
[1]
[2]