Honda EU10iT1, Manual

Page: 114 / 138

14-9
dummyhead dummyhead
ROCKER ARM/CAMSHAFT
VALVE LIFTER SIDE
Measure the valve lifter roller journal I.D. of the valve
lifter.
If the measurement is more than the service limit,
replace the valve lifter.
Check the valve lifter roller O.D.
VALVE LIFTER ROLLER O.D.
Measure the valve lifter roller O.D.
If the measurement is less than the service limit,
replace the valve lifter roller.
AIR INTAKE JOINT STUD BOLT
REPLACEMENT
Remove the stud bolts [1] from the cylinder block [2].
Thread two nuts onto the air intake joint stud bolt and
tighten them together; then use a wrench to turn the
stud bolt out.
Install and tighten the new stud bolts so that they are
specified length.
STANDARD: 5.005 – 5.025 mm
(0.1970 – 0.2012 in)
SERVICE LIMIT: 5.050 mm (0.1988 in)
STANDARD: 4.990 – 5.000 mm
(0.1965 – 0.1969 in)
SERVICE LIMIT: 4.950 mm (0.1949 in)
SPECIFIED LENGTH: 80.5 – 82.5 mm (3.17 – 3.25 in)
[2]
80.5 – 82.5 mm
(3.17 – 3.25 in)
[1]