HOKUYO AUTOMATIC UAM-05LP, User Manual

Page: 116 / 155



Document No: C-61-00003-3

7.15.2 Area configuration by teaching function
Automatic zone configuration by referring the boundary can be done by using the UAM’s Teaching
function. This function is useful when user needs to configure complex zone or would like to reduce the time
for zone configuration. Steps below show the configuration procedures using the teaching function.

Ensure the UAM is connected with the PC.

Click on the Teaching
button.

Enter the offset to be applied between the zone and the background (Max offset can be up to maximum
measurement distance).

Click the “Start” button (Figure 7-45) to start recording the background data. Recording will continue
until the stop button is clicked.
Further, to use all sensor measurement points for the teaching function, check the [Show all points] and
press [Start] button.
Figure 7-45 Teaching setting