HOKUYO AUTOMATIC UAM-05LP, User Manual

Page: 63 / 155


Document No: C-61-00003-3


5. Installation
Cautions during the installation of UAM are explained in this chapter.
5.1 Light interference
UAM uses pulsed laser for object detection. Light sources in the surrounding could interfere with its
operation leading to false detection. User should examine the surroundings environments before installing
the UAM. Some of the light sources that could interfere with UAM are as below.

Incandescent light

Fluorescent light

Stroboscopic light

Flashing beacon

Sunlight

Infrared light sources
In case the light source cannot be avoided during the operation, UAM should be installed with the light
source located at ±5 degrees or more from the detection plane to prevent the interference (Figure 5.1).
Figure 5-1 Installation to avoid light interference


User should perform risk assessment for light interference in the working
environment before the installation.

Avoid direct light such as stroboscopic, flashing beacon, fluorescent.

Failing to comply with the above could lead to critical injury or death.


User should verify detection capability before actual operation.
