manualshive.com logo in svg

Hitachi Virtual Storage Platform F400, Service Manual, Page: 365 / 418

Share
Download
Hitachi Virtual Storage Platform F400 Service Manual Download Page 365

Collect the dump files (see 

Using the Dump tool on
page 379

).

If the collection fails, collect the
target files manually (see ).

TRRMIS000023

ERROR

An unexpected error occurred
in the RMI-API Server service.

Collect the dump files (see 

Using the Dump tool on
page 379

).

If the collection fails, collect the
target files manually (see ).

TRRMIS000024

ERROR

An unexpected error occurred
in the RMI-API Server service.

Collect the dump files (see 

Using the Dump tool on
page 379

).

If the collection fails, collect the
target files manually (see ).

TRRMIS001001

INFO

Output when starting the RMI-
API Server service. To check
that the RMI-API Server service
has started normally, match it
to the log and check that
TRRMIS001002 is output.

TRRMIS001002

INFO

Output when the start of the
RMI-API Server service is
completed normally.

TRRMIS001003

WARN

Operating with the default
value indicated in the log
content because the acquisition
of the port number used in the
RMI-API Server service failed.

Check that the port value of the
port number key
RMIClassLoader is set correctly
(see Changing SVP port
numbers). Stop the appropriate
storage system once from the

Storage Device List

 and

restart it.

If the condition does not
change after restarting, restart
the SVP.

If it does not recover after
restarting the SVP, set it up
again.

TRRMIS001004

WARN

Operating with the default
value indicated in the log
content because the acquisition
of the environment setting

Troubleshooting the storage system

365

Service Guide for VSP Gx00 and VSP Fx00 Models

Summary of Contents for Virtual Storage Platform F400



































































































































































































































































































































































































































Reviews:

No comments