Hioki PW3360-20 Instruction Manual Download | Manualshive

Page: 202 / 224

background image

13.1 Trouble Shooting

194

If the cause of the issue remains unclear, reset the system. Doing so will initialize

settings to their factory defaults.

See:

4.5, "Initializing the Instrument (System Reset)" (p. 74)

Measured values
do not stabilize.

• Is the frequency of the

lines being measured 50
or 60 Hz?



The instrument does not
support 400 Hz frequency
lines.

The instrument can only be used with
50/60 Hz lines. Lines operating at 400
Hz cannot be measured.

• If the wiring setting is

1P2W/1P3W/3P3W/
3P4W, is voltage input
being supplied?



The instrument may not be
able to perform stable
measurement without volt-
age input.

If not measuring voltage, select the
current-only wiring and set the fre-
quency setting to the measurement
line frequency (50/60 Hz).

See:

4.3, "Changing Recording (Save)
Settings" (p. 65)

Unable to charge
the 9459 Battery
Pack (the Charge
LED does not
light up).

• Verify that the ambient

temperature is within the
range of 10°C to 40°C.

The instrument’s battery can be
charged within the ambient tempera-
ture range of 10°C to 40°C.

See:

"Installing (replacing) the Battery
Pack" (p. 24)

• Has the instrument been

stored for an extended
period of time with the bat-
tery pack installed?

The battery pack may have
degraded, signaling that it needs to
be replaced. Please purchase a new
battery pack. Contact your Hioki dis-
tributor for more information. If the
instrument will not be used for one
month or longer, remove the battery
pack and store at -20°C to 30°C.

See:

"Installing (replacing) the Battery
Pack" (p. 24)

The battery pack
can only be used
for a short period
of time.

• The batter pack’s capacity

may have deteriorated due
to degradation.

Symptom

Check Item, or Cause

Remedy and Reference

«
...
200
201
202
203
204
...
»

Summary of Contents for PW3360-20

































































































































































































































Reviews:

No comments

Related manuals for PW3360-20

Brand: Xylem Pages: 45

Brand: Co2meter Pages: 24

Brand: OVARRO Pages: 50

Brand: Novus Pages: 12

Brand: Novus Pages: 6

Data Logger v2 Series

Brand: DAC Pages: 104

Brand: Opticon Pages: 16

Brand: banks Pages: 16

ebro EBI 25-System

Brand: Xylem Pages: 40

Minitrend QX Series

Brand: Honeywell Pages: 5

Brand: Racelogic Pages: 33

Brand: SoundEar Pages: 16

Brand: Steinberg Pages: 13

Brand: KORINS Pages: 14

PENDANT G UA-004-64

Brand: Hobo International Pages: 4

UX90-002 Series

Brand: Hobo Pages: 6

Brand: Computex Pages: 19

Brand: BOVIAR Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands