Hioki PW3360-20, Instruction Manual, Page: 30 / 224

2.2 Preparing to Use the Instrument after Purchase
22
5 Spiral Tubes provided with Model L9438-53 Voltage Cord. Use the Spiral Tubes as
and when required. The number of voltage cords that will be bound together
depends on the measurement target.
Preparation items:

single-phase/3-wire (1P3W) and 3-phase/3-wire (3P3W2M)
2.2 Preparing to Use the Instrument after

Purchase
Bundle the Voltage Cord Leads with the Spiral Tubes
Measurement target Voltage cord to use (color)
Single-phase/2-wire (1P2W),
Single-phase/3-wire (1P3W1U)
Two cords (black and red)
Single-phase/3-wire (1P3W),
3-phase/3-wire (3P3W2M)
Three cords (black, red, and yellow)
3-phase/3-wire (3P3W3M) Three cords (red, yellow, and blue)
3-phase/4-wire (3P4W) Four cords (black, red, yellow, and blue)
Model L9438-53
Voltage Cord
Banana Plug Leads three, one each black, red, and yellow
Alligator Clips
three, one each black, red, and yellow
Five Spiral Tubes

(for cable bundling)
1
Line up the ends of the voltage cords and
wrap the spiral tube around them.
Wind a Spiral Tube round the multiple cords.
Five Spiral Tubes are provided. Please wind the
tubes at appropriate intervals.
2
Insert the same color alligator clip into each lead.
You can also use magnet adapters instead of alligator clips.
Spiral Tubes
Yellow
Black
Red
Yellow
Black
Red
Insert securely all the way.
• Model 9804-01 Magnet Adapter

(optional, red, standard screws: M6 pan-head screw)
• Model 9804-02 Magnet Adapter

(optional, black, standard screws: M6 pan-head screw)
φ
11 mm