Hioki PW3360-20 Instruction Manual Download

Page: 115 / 224

8.5 Loading Settings Files

107

Chapter 8 Sav

ing Dat

and Ma

nipulat

ing Files

This section describes how to load a settings file that was previ-
ously saved on the SD memory card or in the instrument’s internal
memory.

8.5 Loading Settings Files

LAN settings are not loaded.

SD Memory Card

Press the

key to display the

[FILE, SD]

screen.

Select the settings file (with the
.SET extension) to load.

: Move within the folder

hierarchy.

: Move up and down.



(Select folders and files)

Settings files saved using the functional-
ity provided by the instrument for saving
settings can be found in the

[PW3360]

-[SETTING]

folder.

Press the

[SET.LOAD]

key.

When the confirmation dialog box
is displayed, press the

[YES]

key.

Summary of Contents for PW3360-20

































































































































































































































Search results

Summary of Contents for PW3360-20

Reviews:

Related manuals for PW3360-20

Brands by name

Popular brands

Hioki PW3360-20, Instruction Manual

Search results

Summary of Contents for PW3360-20

Reviews:

Related manuals for PW3360-20

Brands by name

Popular brands