Hioki PW3360-20 Instruction Manual Download

Page: 94 / 224

5.8 Enlarging Measured Values on the Display

Press the

[SCREEN]

key to display the

[MEAS, ZOOM]

screen.

Changing display parameters

5.8 Enlarging Measured Values on the Display

Selects the parameter to enlarge.

Press the

[SELECT]

key.

The cursor will move to the display parameter field, and you will be able to
change the setting.

Using the cursor keys, move to
the parameter whose enlarged
display you wish to change and

press the

[ENTER]

key.

A dialog box for selecting the en-
larged display will be displayed.

Select the desired parameter with the cursor keys and accept the new

setting with the

[ENTER]

key.

Change other parameters similarly.

Press the

[SELECT]

key to cancel the setting process.

Display of selection position
of the scrolling parameter

Summary of Contents for PW3360-20

































































































































































































































Search results

Summary of Contents for PW3360-20

Reviews:

Related manuals for PW3360-20

Brands by name

Popular brands

Hioki PW3360-20, Instruction Manual

Search results

Summary of Contents for PW3360-20

Reviews:

Related manuals for PW3360-20

Brands by name

Popular brands