Hioki PW3360-20, Instruction Manual

Page: 134 / 224

9.3 Checking Recording and Measurement Data with Excel
126
Measurement data
PFdem Power factor demand value The average value of the
power factor for each
time interval
PFdem1 to PFdem3
Power factor demand value, first cir-
cuit to third circuit

Power factor demand value for each
of three 1P2W circuits
Pulse Pulse input value
Pulse input count value
for each interval time x
scaling setting value
(including sub-units)
Parameter Parameter name Description
2 2
demLAG) ( ) (Pdem
Pdem
Q
 

• For average value data, [Avg] is shown as [xxx] .
• For maximum value data, [Max] is shown as [xxx] .
• For minimum value data, [Min] is shown as [xxx] .
• Units are shown in brackets after the parameter name.
• Average values are not available for voltage and current peak
values.
• For current-only wirings, no average value is available for the
current fundamental wave phase angle.
Data Data format Description
Normal data 12.345E+00 Outputs exponential data.
Invalid data 0.0000E+99
If the display reads [-----] and measurement is not
possible, outputs invalid data.
Example: With no input, it is not possible to measure
the power factor (resulting in invalid data).