Hioki PW3360-20 Page 201 Instruction Manual Download

Page: 201 / 224

13.1 Trouble Shooting

193

Chapte

r 13

Mai

nance a

d Se

rvic

Before returning for repair

Before Having the Instrument Repaired

Symptom

Check Item, or Cause

Remedy and Reference

The display does
not appear when
you turn the power
on.

If powering the instrument with
the AC adapter

• Are the power cord and

AC adapter properly con-
nected?

Verify that the power cord or AC
adapter is connected properly.

See:

2.5, "Supplying the Power" (p. 32)

If powering the instrument with
the battery

• Has the PW9002 Battery

Set (9459 Battery Pack)
been properly installed?

• Has the battery pack been

charged?

Verify that the battery pack has been
charged and installed.

See:

"Installing (replacing) the Battery
Pack" (p. 24)

Keys do not work.

• Has the key lock been acti-

vated?

Press and hold the

ESC

key for at

least 3 seconds to cancel the key
lock.

Voltage or current
measured values
are not being dis-
played.

• Are the voltage cords or

clamp sensors connected
improperly?

• Are the input channels and

display channels incor-
rect?

• Has an appropriate current

range been selected?

Check the wirings and wiring settings.

See:

3.3, "Connecting the Voltage
Cords" (p. 45) to 3.8, "Verifying
Correct Wiring (Wiring Check)" (p.
54)

Summary of Contents for PW3360-20

































































































































































































































Search results

Summary of Contents for PW3360-20

Reviews:

Related manuals for PW3360-20

Brands by name

Popular brands

Hioki PW3360-20, Instruction Manual

Search results

Summary of Contents for PW3360-20

Reviews:

Related manuals for PW3360-20

Brands by name

Popular brands