Hioki PW3360-20 Instruction Manual Download

Page: 106 / 224

8.1 Viewing and Using the File Screen

SD memory card file screen

8.1 Viewing and Using the File Screen

Displays the File screen (SD
memory card/internal memory)
and switches screens.

Displays the amount of space used
on the SD memory card.

Displays the current display location. In this case, the screen is
displaying the PW3360 folder on the SD memory card.

When you scroll the screen with the

cursor

keys, the scroll bar indicates your current position.

Displays a folder and file list. The list order reflects the order in the save area on the SD
memory card.

: Move within the folder hierarchy (select folders and files).

: Move up and down.

: Folder

: File

Function keys

Reference

USB Drive 10.1, "Copying Data to a Computer (USB)" (p. 130)

SET.LOAD 8.5, "Loading Settings Files" (p. 107)

DELETE

8.7, "Deleting Folders and Files" (p. 110)

FORMAT

8.8, "Formatting the SD Memory Card or Internal
Memory" (p. 111)

• The File screen can display folder and file names of up to eight

byte characters in length (or four double-byte characters). Lon-
ger names are truncated and displayed.



Example: Filename: 1234567890



Display on File screen: 123456~X (X: number)

• Up to 204 folders and files can be displayed. Folders and files in

excess of that number will not be shown.

Summary of Contents for PW3360-20

































































































































































































































Search results

Summary of Contents for PW3360-20

Reviews:

Related manuals for PW3360-20

Brands by name

Popular brands

Hioki PW3360-20, Instruction Manual

Search results

Summary of Contents for PW3360-20

Reviews:

Related manuals for PW3360-20

Brands by name

Popular brands