Hioki PW3360-20 Page 205 Instruction Manual Download

Page: 205 / 224

13.3 Error Indication

197

Chapte

r 13

Mai

nance a

d Se

rvic

File error

Error display

Cause

Solution/more information

*** FILE ERROR ***
Save failed.

The instrument was unable
to save data due to a prob-
lem with the SD memory
card.

Format the SD memory
card.

See:

8.8, "Formatting the SD
Memory Card or Internal
Memory" (p. 111)

The instrument was unable
to save data due to a prob-
lem with its internal memory.

Format the internal memory.

See:

8.8, "Formatting the SD
Memory Card or Internal
Memory" (p. 111)

*** FILE ERROR ***
Load failed.

The instrument was unable
to load settings data due to
a problem with the settings
file.

Create a new settings file
and load it.

See:

8.4, "Saving Settings
Files" (p. 106)

*** FILE ERROR ***
File or folder could not be
deleted.

The SD memory card is in
the locked (write-protected)
state, or the file or folder
attribute is set to “read-only.”

If the SD memory card is
locked, unlock it.

If the file or folder attribute is
set to “read-only,” change
the attribute using a com-
puter.

*** FILE ERROR ***
The file with the same name
exists.

The instrument was unable
to copy data from its internal
memory to the SD memory
card because data with the
same filename already
existed on the SD memory
card.

Delete the data with the
same filename from the SD
memory card or change the
filename using a computer.

*** FILE ERROR ***
Formatting failed.

An SD memory card error
occurred, or the card was
ejected, during formatting.

Reinsert the SD memory
card and format it again. If
unable to format the card,
the card may be damaged
and should be replaced.

An internal memory error
occurred.

The instrument needs to be
repaired.
Contact your authorized
Hioki distributor or reseller.

*** FILE ERROR ***
No settings file.
Select a settings file.

The instrument was unable
to load the settings because
the selected file is not a set-
tings file.

Select a settings file (exten-
sion of .SET).

Summary of Contents for PW3360-20

































































































































































































































Search results

Summary of Contents for PW3360-20

Reviews:

Related manuals for PW3360-20

Brands by name

Popular brands

Hioki PW3360-20, Instruction Manual

Search results

Summary of Contents for PW3360-20

Reviews:

Related manuals for PW3360-20

Brands by name

Popular brands