Hioki PW3360-20 Page 122 Instruction Manual Download

Page: 122 / 224

9.1 Copying Data to a Computer (SD)

114

This section describes how to eject the SD memory card from the instrument and

copy data from the card to a computer. If the computer does not have an SD mem-

ory card slot, please purchase an SD memory card reader.

You can also download instrument data (from the SD memory card or the instru-

ment’s internal memory) to a computer using the instrument’s USB or LAN function-

ality.

See:

Chapter 10, "Using Communications (USB/LAN)" (p. 129)

Windows7

9.1 Copying Data to a Computer (SD)

Verify that recording and measure-
ment have stopped.

Removing a card while data is being
written to it may damage the card.

Eject the SD memory card from the instru-
ment.

Insert the SD memory card into the SD memory card slot on the computer.

Extinction

Summary of Contents for PW3360-20

































































































































































































































Search results

Summary of Contents for PW3360-20

Reviews:

Related manuals for PW3360-20

Brands by name

Popular brands

Hioki PW3360-20, Instruction Manual

Search results

Summary of Contents for PW3360-20

Reviews:

Related manuals for PW3360-20

Brands by name

Popular brands