Hioki PW3360-20 Page 113 Instruction Manual Download

Page: 113 / 224

8.3 Saving Copies of the Screen (SD Memory Card Only)

105

Chapter 8 Sav

ing Dat

and Ma

nipulat

ing Files

The screen currently being displayed can be saved in BMP file for-
mat on the SD memory card.

8.3 Saving Copies of the Screen



(SD Memory Card Only)

Even if the save destination (p. 65) is set to

[Internal M]

, screen

copies are saved on the SD memory card. If no SD memory card
has been inserted, screen copies cannot be saved.

Verify that an SD memory card has been inserted into the instrument.

Display the screen you wish to save and press the

key.

You can save a hold screen by pressing the

[HOLD]

key.

The screen will be saved in the

[PW3360]

[HARDCOPY]

folder in the SD memory

card’s root folder (at the top of the card’s folder hierarchy).

See:

8.2, "Folder and File Structure" (p. 100)

SD card mark

Summary of Contents for PW3360-20

































































































































































































































Search results

Summary of Contents for PW3360-20

Reviews:

Related manuals for PW3360-20

Brands by name

Popular brands

Hioki PW3360-20, Instruction Manual

Search results

Summary of Contents for PW3360-20

Reviews:

Related manuals for PW3360-20

Brands by name

Popular brands