Hioki LR8410-20, Instruction Manual

Page: 80 / 364

3.2 Configuring Measurement Settings
68
Configure measurement settings on the [Setting] screen.
The instrument provides continuous recording and timed recording. You can spec-
ify whether to perform repeat recording for each.
3.2 Configuring Measurement Settings
The Setting screen cannot be displayed while measuring.
Measuring Method Setting Method
Continuous

Recording
Sets the record time to [Cont] .
Timed recording Sets the record time to [Time] . This allows you to set the amount of
time for which to record data.
Repeat Recording Set [Repeat] to On.
Time Setting by Key Operations
Continuous
Recording
(
[Cont] )
Timed

recording
(
[Time] )
Start Measurement Stop Measurement
Press STOP to stop measuring. Otherwise, mea-
surement continues until the stop-trigger criteria are
met.
Measurement is performed for the specified amount
of time. Measurement stops when the specified re-
cording time has elapsed.
Measurement can also be stopped by pressing
STOP before the end of the recording time, or the
stop-trigger criteria are met.
Repeat
Recording When stopped by a stop trigger or elapsed recording
time, measurement automatically restarts. Press
STOP to stop measuring.
( [Repeat] : On)
Measurement is performed for
the specified amount of time.
Apply
Open the setting options
for the item to be set.
Select from the listed

options.
1
2
Select the [Setting]
screen.
Move to a setting item.