Hioki LR8410-20, Instruction Manual

Page: 115 / 364

3.10 Viewing and Editing with the All-Channel Settings List
103
3
3
Chapt
er
3 Sett
ings
• The contents of the displayed settings are copied, except for "waveform
display color", "input type", and "measurement On/Off settings". How-
ever, "input type" and "measurement On/Off settings" can be copied from
the [List] screen.
• RTD (Resistance Temperature Detector), resistance and temperature
settings (specific to a Wireless Universal Unit) cannot be copied to a
Voltage/Temperature Unit.
 UNIT1
to
UNIT7
• [Copy the settings of CHX-1 shown on screen to CHX-2 till CHX-15.]

(X indicates a measurement unit symbol.)
Copies the settings from channel CH1 on the screen to channels CH2 to CH15 in the same input unit.
On a wireless logger, the screen will display the following message:
[Copy the settings of CHX-1 shown
on screen to CHX-2.]
On the Wireless Humidity Logger's [Settings List] screen, the CHX-1T/CHX-1H settings will be copied to
CHX-2T/CHX-2H. On the
[Conversion/Calculation]
and
[Trigger/Warning]
screens, the instrument will dis-
play the following message and copy the CHX-1T settings to other channels:
[Copy the settings of CHX-
1T shown on screen to other channels.]
This message is not displayed on the Wireless Fungal Logger.
• [Copy the settings of CH1-1 shown on screen to all analog CHs.]
Copies the settings on the CH1 screen to CH2 through CH15 and all analog channels of units 2 through 7 for
which the measurement setting is on.
Settings cannot be copied to a unit of a different type than UNIT1, with the sole exception that settings
for channels whose input type is voltage or thermocouple can be copied between a Wireless Voltage/
Temp Logger and a Wireless Universal Unit.
If UNIT1 is a Wireless Pulse Logger, the instrument will display the following message:
[Copy the settings
of CH1-1 shown on screen to pulse CH.]
On a Wireless Humidity Logger or Wireless Fungal Logger, the
CH1-1 settings on the [Settings List] screen will be copied two or four channels at a time. On the
[Con-
version/Calculation]
and
[Trigger/Warning]
screens, the instrument will display the following message
and copy the CH1-1T settings to other channels:
[Copy the settings of CH1-1T shown on screen to all an-
alog channels.]
On a Wireless Humidity Logger or Wireless Fungal Logger, the CH1-1 settings on the
[Settings List]
screen will be copied two or four channels at a time. On the
[Conversion/Calculation]
and
[Trigger/Warning] screens, the instrument will display the following message and copy the CH1-1T set-
tings to other channels:
[Copy the settings of CH1-1T shown on screen to all analog channels.]
 calc1
• [Copy the settings of W1 shown on screen to W2 till W15.]
Copies the settings from waveform calculation channels W1 and W16 on the screen to channels W2 to W15.
• [Copy the settings of W1 shown on screen to all the other waveform calc. CHs.]
Copies the settings from waveform calculation channel W1 on the screen to the enabled (On) channels
from W2 to W30.
 calc2
• [Copy the settings of W16 shown on screen to W17 till W30.]
Copies the settings from waveform calculation channel W16 on the screen to channels W17 to W30.