Hioki LR8410-20, Instruction Manual

Page: 286 / 364

11.3 Carry Out Measurement
274
Configure various settings with the instrument as needed and start a measurement .
Some errors between values measured with the instrument and ones neasured with a
Link product may be observed depending on the difference in the data retention meth-
ods.
・
A datum at a request from the instrument to a Link product will be saved as a measure-
ment value.
If the request interval is longer than the sampling interval, a step-like waveform is dis-
played because lack of data is compensated with the most recent data. The data will not
recovered if the communications break
For more details, refer to each of the Link product s’ instruction manuals.
11.3 Carry Out Measurement
• The setting information of the Link product will not be updated during the
measurement. Complete the configuration of necessary settings prior to
the measurement.
• If the setting information is made different from the one configured before
the measurement, for example, the Link product setting is changed after
the measurement, the setting information will not be reflected to the
instrument until the measurement data is deleted.
• The measurement starts after the setting information is automatically
received.
11.4 Measurement data
Measurement value errors
Measurement values