Hioki LR8410-20, Instruction Manual

Page: 133 / 364

4.3 Marking Waveforms and Searching Marks (Search Function)
121
3
Chapt
er
4 Observing
Me
asurement
s and
D
at
a
4
You can insert up to 1000 event marks at any point while measur-
ing, to help find them later.
See:
"Searching Event Marks" (p. 125)
Event marks can be applied by the following methods.

Press START while measuring

Press the on-screen [Make Mark] button.
 Apply a signal to the EXT TRIG terminal

When a warning occurs
Use this procedure to insert event marks while viewing data on the Waveform/Numerical
Value screen during measurement.
Press
START to apply a mark.
Event marks are numbered in the sequence they are inserted.
Marks can also be applied with the following procedures.
4.3 Marking Waveforms and Searching Marks
(Search Function)
Inserting Event Marks While Viewing Waveforms
1 2 3
Select [Event] .
1
The event settings are displayed.
3
Apply
Select [Gauge+Wave] .
Move to [Make Mark] .
Press to insert an event
mark.
Event numbers appear on the
waveform displayed when you
select
[Make Mark] .
2
Select [Channel] .
2
3