Hioki LR8410-20, Instruction Manual

Page: 285 / 364

11.2 Configure Settings
273
3
Chapt
er 1
1 Using Ot
he
r Hioki Product
s (LR8410
Link)
11
*
1:The Info1 or Info2 will be displayed only if the setting information corresponding to
each of them is received. No information will be displayed without any corresponding
setting information
.
• The scaling setting and the upper and lower limits setting in the instru-
ment will be reflected when the mode or the range setting information of
the Link product is changed. If it is changed manually, the scaling func-
tion will be enabled until the mode or range setting information of the Link
product is changed.
• If the unit registration information is loaded from the internal memory, the
setting information will be considered to be not obtained until it is
received after the Link product is connected to the instrument.
• The Link products’ settings cannot be configured with the instrument.
Configure the settings with each of the Link products, referring to each
product’s instruction manual.
• The level values of the trigger and the alarm as well as the window upper
and lower limits will be the value that is the measurement mode of

[Voltage] and the measurement range of [1 V] to which the scaling setting
is reflected.
[List] screen
Received setting information
*
1