Hioki LR8410-20, Instruction Manual

Page: 355 / 364

Appendix 12 Instrument/Unit Communications Interruptions and Reestablishment
A
39
Appendix
Start trigger rising slope

OR
Stop trigger falling slope

AND
Stop trigger rising slope

AND
Stop trigger
Start trigger
Connection Connection interruption
Instrument data
Data following the stop trigger is not restored,
but rather reported as “NO DATA.”
Start trigger Stop trigger
Example: Stop trigger criteria
When the stop trigger falling slope

AND and the stop trigger rising slope

AND are the same
Data before the start trigger is not saved.
①
②
③
④
Unit data
Start trigger rising slope

OR
Stop trigger falling slope

AND
Stop trigger rising slope

AND
When unit 1 and then unit 2 are connected to the instrument (in that order)
(1) Recording of data starts at the start trigger position.
(2) All data from unit 1 is restored.
(3) Data from unit 2 is restored.
(4) Since the stop trigger criteria were met while data from unit 2 was being restored, both
the data restoration and measurement stop.
Unit 1
Unit 2
Unit 1
Unit 2