Hioki 8715-01, Instruction Manual

Page: 95 / 214

79
_____________________________________________________________________
4.5 Instantaneous Waveform Recording(Memory Record)
______________________________________________________________
Upward trigger direction
(slope : )
Trigger level
RMS value
Input signal
Trigger point
Trigger point
Downward trigger direction
(slope :
)
Procedure Screen: CH SETTING / Waveform Display
Flashing cursor
4.5.3 RMS Level Trigger
Triggering occurs when the input signal crosses the preset
trigger level (rms value) with the preset trigger slope ( ,
).
1. Press the CH SET key to display the desired
CH SETTING screen.
2. Move the flashing cursor to the TRIG position and select
RMS using the keys.
3. Move the flashing cursor to the position shown in the
figure below, and set the trigger level using the
keys.