Hioki 8715-01, Instruction Manual

Page: 54 / 214

38
_____________________________________________________________________
3.5 Trigger Functions
______________________________________________________________
Press the
CH1 - 4 key
3.5 Trigger Functions
･
The term "trigger" refers to a signal which is used to
control the timing for recording start. The term
"triggering has occurred" refers to the state when such a
signal has activated recording start.
･
Trigger settings can be made on each CH SETTING
screen or on the Waveform Display screen. This
document mainly describes the CH SETTING screen
settings.
Trigger conditions for the Waveform Measurement
Mode, with primary usage examples
･
Level Trigger In-rush current measurement
･
Window-In/Out Trigger Overvoltage (or current)
･
Voltage Drop Trigger
Momentary voltage dropouts and brownouts
･
Period Trigger Power frequency anomalities
･
Waveform Detection Trigger
Surge and noise measurement