Hioki 8715-01, Instruction Manual

Page: 59 / 214

43
_____________________________________________________________________
3.5 Trigger Functions
______________________________________________________________
Window-In Trigger Window-Out Trigger
Procedure Screen: CH SETTING / Waveform Display
Flashing cursor
3.5.2 Window-In/Out Trigger
Window-In Trigger
Set upper limit level and lower limit level and activated
when the input signal enters the range between these limits.
Window-Out Trigger
Set upper limit level and lower limit level and activated
when the input signal leaves this range.
1. Press the CH SET key to display the desired
CH SETTING screen.
2. Move the flashing cursor to the TRIG position and select
IN or OUT using the keys.