Hioki 8715-01, Instruction Manual

Page: 148 / 214

132
_____________________________________________________________________
7.1 Printing Procedure
______________________________________________________________
･
Waveform
･
Trend Instaneous
waveform recording
Specified range (out of entire data
recorded from a measurement) is
printed.
Trend RMS recording Measurement data stored in memory
(200 DIV max.) before the end of
measurement are printed.
Procedure Screen: Waveform Display
7.1.4 Partial Print
This function prints the waveform between the A and B
cursors. The function is available also when the A/B
cursors are currently outside the range displayed on screen.
When only the A cursor is enabled, waveform data is
printed from the A cursor to the end of the data.
For details regarding the use of the A/B cursors, refer to
Section 5.1.
1. Press the DISP key to display the Waveform Display
screen.
2. Position cursor A at the start point of the range to be
printed.
3. Specify the end point of the range with cursor B.
(Move cursor B (or A) to the right. When the cursor is at
the rightmost edge of the screen, the waveform scrolls to
the left, and cursor A (or B) scrolls with it.)
4. Then press the PRINT key.
The specified range is printed, also if cursor A (or B) is
currently off screen.