Hioki 8715-01, Instruction Manual

Page: 159 / 214

143
_____________________________________________________________________
8.3 Settings on the File Screen
______________________________________________________________
Screen: File Procedure
Flashing cursor
Flashing cursor
Binary The waveform data is saved in binary format.
Set
The settings are saved.
Text The waveform data is saved in text format.
Data stored in the text format is not readable by
the 8715-01.
Binary
(ALL)
Sequential Save data can be saved in binary
format. An index file is also created.
Text (ALL) Sequential Save data can be saved in a text
format. An index file is not created.
(1) Select the command to save.
1. Press the CARD key to display the File screen.
2. Move the flashing cursor to the position shown in the
figure below and select Save using the keys.
(2) Select the stored format.
1. Press the START key to display the Storing Format
setting screen.
2. Move the flashing cursor to the position shown in the
figure below and select the format using the
keys.