Hioki 8715-01, Instruction Manual

Page: 160 / 214

144
_____________________________________________________________________
8.3 Settings on the File Screen
______________________________________________________________
NOTE
When sequential save is used with instantaneous waveform
recording by the WAVEFORM sequential save and RMS
TREND instaneous waveform recording, "Binary ALL" and
"Text ALL" can be used for saving files.
If measurement data is saved using "Binary ALL," an index file
is created. All saved measurement data can be read at once by
reading the index file (the file with the extension SEQ and
RMM).
Flashing cursor
ALL
Store data for all captured waveforms.
A-B
(partial saving)
If A cursor is in use, data is saved from the
cursor to the end of input.
If both A and B cursors are in use, data between
the cursors is saved.
(3) If using the A/B cursors on the screen, specify the area
to save.
Move the flashing cursor to the position shown in the
figure below and use the
keys to make a setting.