Hioki 8715-01, Instruction Manual

Page: 93 / 214

77
_____________________________________________________________________
4.5 Instantaneous Waveform Recording(Memory Record)
______________________________________________________________
Press the
CH1 - 4key
4.5.2 Setting the Instaneous Waveform Trigger
･
The term "trigger" refers to a signal which is used to
control the timing for recording start. The term
"triggering has occurred" refers to the state when such a
signal has activated recording start.
･
Instantaneous waveform triggering can be set when
instantaneous waveform recording in the RMS Trend
Measurement Mode is enabled (ON).
･
The instantaneous waveform trigger can be set on each
CH SETTING screen, or on the Instantaneous Waveform
Display screen in RMS Trend Measurement Mode. This
document mainly describes the CH SETTING screen
settings.
Instantaneous Waveform Trigger Types and Primary
Applications
･
RMS Level Trigger
Instantaneous power trend waveforms
･
RMS Window In/Out Trigger
Instantaneous power trend waveforms
･
Voltage Drop Trigger
Voltage Dropouts, Instantaneous stop waveforms
･
Level Trigger and Window In/Out Trigge
DC measure voltage (100V DC range only)