Hioki 8715-01 Instruction Manual Download Page 84

Page: 84 / 214

_____________________________________________________________________

4.4 Input Channel Setting (Trend)

______________________________________________________________

Procedure-1

Screen: CH SETTING

Flashing cursor

Procedure-2

Screen: Waveform Display

Flashing cursor

4.4.3 Setting the Waveform Position

Set the waveform display position.
The waveform display can be repositioned if it is obscured,
such as by an overlapping window.

1. Press the CH SET key to display the desired

CH SETTING screen.

2. Move the flashing cursor to the Posn position.
3. Use the

keys to make a setting.

1. Press the DISP key to display the waveform display

screen.

2. Press the CH1 - CH4 key to display the setting window.
3. Move the flashing cursor to the position shown in the

figure below and use the

keys to make a setting.

Pressing the POSN key moves the flashing cursor
automatically to the Time Axis position for setting.

Summary of Contents for 8715-01























































































































































































































Search results

Summary of Contents for 8715-01

Reviews:

Brands by name

Popular brands

Hioki 8715-01, Instruction Manual

Search results

Summary of Contents for 8715-01

Reviews:

Brands by name

Popular brands