Hioki 8715-01 Instruction Manual Download Page 153

Page: 153 / 214

137

_____________________________________________________________________

8.2 Using the PC Card Slot

______________________________________________________________

CAUTION

･

If a PC card is inserted upside down, backwards, or in
the wrong direction, the PC card or the instrument may
suffer damage.

･

Do not remove the PC card while the PC card unit is

operating.

･

Before shipping the instrument, always remove the PC
card and close the cover.

Eject button

8.2 Using the PC Card Slot

Before using a new PC Card, it must be initialized. For
details, see Section 8.3.6.

PC Card Insertion and Removal

Open the cover and insert the PC Card face up.
To remove the card, press the Eject button and remove the
PC card.
Always close the cover when the PC card is not used.

Summary of Contents for 8715-01























































































































































































































Search results

Summary of Contents for 8715-01

Reviews:

Brands by name

Popular brands

Hioki 8715-01, Instruction Manual

Search results

Summary of Contents for 8715-01

Reviews:

Brands by name

Popular brands