Hioki 8715-01, Instruction Manual

Page: 171 / 214

155
_____________________________________________________________________
8.3 Settings on the File Screen
______________________________________________________________
Screen: File Procedure
Flashing cursor
8.3.7 Changing the Names of Files and
Directories
Change the name of a saved file, or a directory name.
(1) Select the command to rename.
1. Press the CARD key to display the File screen.
2. Move the flashing cursor to the position on the figure
below and select Rename using the keys.
(2) Select the file to be renamed.
Select the file or directory to be renamed using the
Cursor keys.
(3) Rename the file
1. Press the START key to display the old and new file
name fields.
2. Enter the file name (refer to Section 8.3.3).
3. When finished with settings, press the START key to
accept or STOP key to cancel renaming.