Hioki 8715-01, Instruction Manual

Page: 187 / 214

171
_____________________________________________________________________
10.3 Removing the Battery Before Discarding the Instrument
______________________________________________________________
WARNING
･
To avoid the risk of electric shock, be sure that all
cables and the power cord are disconnected before
removing the battery.
･
Dispose of used batteries according to their type in
the prescribed manner and in the proper location.
lithium battery
Figure 1
Figure 2 Figure 3
10.3 Removing the Battery Before
Discarding the Instrument
The 8715-01 incorporates a lithium battery for memory
backup. Before final disposal of the 8715-01, remove the
lithium battery as described below.
1. Check that the instrument is powered OFF.
2. Remove the four screws which is holding on the rear
panel with a Phillips screwdriver (see Figure 1).
And remove the printer instrument connecting portion.
3. Remove the two hidden screws in the cover using a
Phillips screwdriver (see Figure 2).
4. Remove the upper case (front).
5. Wrench up the battery, and cut the positive (+)
connection with nippers (see Figure 3). Wrench the
battery up further.
6. Cut the negative (-) connection, which was underneath
the battery.