Hioki 8715-01, Instruction Manual

Page: 155 / 214

139
_____________________________________________________________________
8.3 Settings on the File Screen
______________________________________________________________
Screen: File Procedure
Flashing cursor
Selected file
Select a file.
(1) Select the command to load.
1. Press the CARD key to display the File screen.
2. Move the flashing cursor to the position shown in the
figure below and select Load using the keys.
(2) Select the file for loading data.
Using the cursor keys, select the file for loading
data from the file list.
You can select files in multiples of ten using the
key, and multiples of one hundred using the
key.