manualshive.com logo in svg

Hillrom Compella, Instructions For Use Manual

Share
Download
Hillrom Compella Instructions For Use Manual Download Page 7

Compella™ Bariatric Bed System Instructions for Use (178951 REV 6)

v 

R

EVISION

© 2019 by Hill-Rom Services, Inc. ALL RIGHTS RESERVED.

PATENTS / PATENT

 hillrom.com/patents

May be covered by one or more patents. See the above Internet address. 

 

The Hill-Rom companies are the proprietors of European, US, and other patents and pending patent 
applications.

 

No part of this text shall be reproduced or transmitted in any form or by any means, electronic or 
mechanical, including photocopying, recording, or by any information or retrieval system without 
written permission from Hill-Rom Services, Inc. (Hill-Rom).

The information in this manual is confidential and may not be disclosed to third parties without the 
prior written consent of Hill-Rom.

The information in this manual is subject to change without notice. Hill-Rom makes no commitment to 
update or keep current, the information in this manual.

Hill-Rom reserves the right to make changes without notice in design, specifications, and models. The 
only warranty Hill-Rom makes is the express written warranty extended on the sale or rental of its 
products.

Notice to Users and/or Patients in EU

—Any serious incident that has occurred in relation to this 

device, should be reported to the manufacturer and the competent authority of the Member State in 
which the user and/or patient is established.

This manual (178951) was originally released and supplied in English. For a list of available translations, 
contact Hill-Rom Technical Support.

Product images and labels are for illustrative purposes only. Actual product and label may vary.

Sixth Edition, 2019-12

First Printing, 2015

Clorox Healthcare® is a registered trademark of Clorox Professional Products Company, Inc.

Oxycide® is a registered trademark of EcoLab USA, Inc.

The UL logo is registered trademark of Underwriter’s Laboratories, Inc.

Legal Manufacturer:

Authorized Australian Sponsor

HILL-ROM, INC.
1069 STATE ROUTE 46 E
BATESVILLE, IN 47006 USA

HILL-ROM PTY LTD
UNIT 4.01, 2-4 LYONPARK ROAD
MACQUARIE PARK NSW 2113
PHONE: 1800 650 083

Authorized Brazilian Representative

Authorized European Union Representative

 

and EU Importer:

VR MEDICAL - MEDICAL DEVICES IMPORTER & DIS-
TRIBUTOR, LTDA.
391 BATATAES STREET
CJ 11-13, 8TH FLOOR
SÃO PAULO, SP - BRAZIL
CNPJ: 04.718.143/0001-94

HILL-ROM SAS
B.P. 14 - Z.I. DU TALHOUËT
56330 PLUVIGNER
FRANCE
Tel: +33 (0)2 97 50 92 12

Summary of Contents for Compella





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands