manualshive.com logo in svg

Hillrom Compella, Instructions For Use Manual

Share
Download
Hillrom Compella Instructions For Use Manual Download Page 53

Patient Transport

Compella™ Bariatric Bed System Instructions for Use (178951 REV 6)

 39 

Engage Transport Mode

Transport

WARNING:

To help prevent personal injury and/or equipment damage, obey these warnings:

•

Warning

—When you transport the bed without the IntelliDrive® XL Transport System engaged, 

make sure the bed is at a sufficient height for the drive wheels to clear ramps and inclines that 
are greater than 3°. 

•

Warning

—During the transport, use caution so that the bed does not tip or overbalance. 

1.

Grip one or both of the push handles that are at the head end of the bed.

1.

Access the transport pod at the patient head-right 
corner of the bed.

2.

Adjust the transport pod into a position for easy 
access. 

3.

Press the green 

Transport

 control (

1

) to lower the bed to the 

transport position (the power drive wheels on the ground). When the 
bed reaches the Transport position, you will hear a single beep, and 
the amber 

Transport

 indicator on the transport pod will turn green.

NOTES

•

If the Bed Up/Down function is locked out, you will hear a triple 
beep. Deactivate the lockout so that you can lower the bed height 
from the transport pod.

•

To put the bed in transport mode, you must use the transport 
pod.

4.

Step down on the green Steer pedal to release the brake and activate 

steer

. The amber brake/steer pedal indicator (

2

) on the transport pod 

will turn green.

Summary of Contents for Compella





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands