manualshive.com logo in svg

Hillrom Compella, Instructions For Use Manual

Share
Download
Hillrom Compella Instructions For Use Manual Download Page 59

Scale Systems

Compella™ Bariatric Bed System Instructions for Use (178951 REV 6)

 45 

Changing the Scale Units

The default units shown on the scale display is kilograms (kg). To change the units to pounds (lb), do as 
follows:

NOTE:

If you do not press the Scale Weigh control within ten seconds, you will hear a beep to let you know that 
the selected configuration will be stored and the display is exiting configuration mode.

S

CALE

 “B” D

ISPLAY

Bed Setup

NOTE:

Everything on or attached to the bed will be included in the scale reading.

 This includes IV poles 

and items attached to the pole; pumps and drainage bags; the patient helper/trapeze; and items 
attached to the headboard, footboard, and siderails.

1.

Make sure the bed is plugged into AC power.

2.

Put all standard linens, blankets, and pillows on the bed. A list of these items posted near the bed 
may be helpful for future reference.

3.

Make sure the bed is not touching anything that could affect the patient weight (other beds or 
carts, headwall, miscellaneous drainage lines, etc.). 

1.

Make sure the 

Enable

 key indicator is 

off

.

2.

Press and hold the 

Zero

 control. After approximately five seconds, as you continue 

to press the 

Zero

 control, press and hold the 

Weigh

 control. When you hear a beep, 

release both controls. The display will be in configuration mode with the current 
unit setting highlighted: 

lb

 or 

kg

.

3.

Press and release the 

Scale

 

Weigh

 control to move through the settings. When you 

reach the applicable setting, release the control and wait until you hear a beep 
(approximately ten seconds). The display will store the new configuration and exit 
the configuration mode.

Summary of Contents for Compella





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands