HIKVISION DS-K3B501S Series User Manual Download

Page: 78 / 116

4. Click OK.

6.7.2 Configure Remaining Open/Closed

You can set the status of the door as open or closed. For example, you can set the door remaining

closed in the holiday, and set the door remaining open in the specified period of the work day.
Before You Start

Add the access control devices to the system.
Steps

1. Click Access Control → Advanced Function → Remain Open/Closed to enter the Remain Open/

Closed page.

2. Select the door that need to be configured on the left panel.

3. To set the door status during the work day, click the Week Schedule and perform the following

operations.

1) Click Remain Open or Remain Closed.

2) Drag the cursor to draw the time duration, which means in that duration of time, the

configured access group is activated.

Note

Up to 8 time durations can be set to each day in the week schedule.

3) Optional: Perform the following operations to edit the time durations.

• Move the cursor to the time duration and drag the time duration on the timeline bar to

the desired position when the cursor turns to .

• Click the time duration and directly edit the start/end time in the appeared dialog.

• Move the cursor to the start or the end of time duration and drag to lengthen or shorten

the time duration when the cursor turns to

4) Click Save.
Related Operations

Copy to Whole

Week

Select one duration on the time bar, click Copy to Whole Week to copy

all the duration settings on this time bar to other week days.

Delete Selected

Select one duration on the time bar, click Delete Selected to delete this

duration.

Clear

Click Clear to clear all the duration settings in the week schedule.

4. To set the door status during the holiday, click the Holiday and perform the following

operations.

1) Click Remain Open or Remain Closed.

2) Click Add.

3) Enter the start date and end date.

4) Drag the cursor to draw the time duration, which means in that duration of time, the

configured access group is activated.

DS-K3B501S Series Swing Barrier User Manual

Summary of Contents for DS-K3B501S Series





















































































































Search results

Summary of Contents for DS-K3B501S Series

Reviews:

Related manuals for DS-K3B501S Series

Brands by name

Popular brands

HIKVISION DS-K3B501S Series, User Manual

Search results

Summary of Contents for DS-K3B501S Series

Reviews:

Related manuals for DS-K3B501S Series

Brands by name

Popular brands