manualshive.com logo in svg

HIKVISION DS-K3B501S Series, User Manual

The HIKVISION DS-K3B501S Series is an advanced security door controller designed to enhance access control systems. This intelligent device ensures maximum security and convenience for users. Discover its full functionality by downloading the free user manual from our website.

Share
Download
background image

Note

• The displayed parameters may vary for different access control devices.

• Some of the following parameters are not listed in the Basic Information page, click More to

edit the parameters.

Name

Edit the card reader name as desired.

Exit Button Type

You can set the exit button as remaining closed or remaining open. Usually, it is remaining

open.

Door Locked Time

After swiping the normal card and relay action, the timer for locking the door starts working.

Door Left Open Timeout Alarm

The alarm can be triggered if the door has not been closed in a configured time period. If it is

set as 0, no alarm will be triggered.

Duress Code

The door can open by inputting the duress code when there is duress. At the same time, the

client can report the duress event.

Super Password

The specific person can open the door by inputting the super password.

Dismiss Code

Create a dismiss code which can be used to stop the buzzer of the card reader (by entering

the dismiss code on the keypad).

Note

• The duress code, super code, and dismiss code should be different.

• The duress code, super password, and the dismiss code should be different from the

authentication password.

• The length of duress code, super password, and the dismiss code is according the device,

usually it should contains 4 to 8 digits.

5. Click OK.

6. Optional: Click Copy to , and then select the door(s) to copy the parameters in the page to the

selected doors(s).

Note

The door's status duration settings will be copied to the selected door(s) as well.

DS-K3B501S Series Swing Barrier User Manual

61

Summary of Contents for DS-K3B501S Series





















































































































Reviews:

No comments

Related manuals for DS-K3B501S Series

Allmatic 12007336 Manual preview
12007336
Brand: Allmatic Pages: 180

Brands by name

Popular brands

Load more brands