manualshive.com logo in svg

HIKVISION DS-K3B501S Series, User Manual

The HIKVISION DS-K3B501S Series is an advanced security door controller designed to enhance access control systems. This intelligent device ensures maximum security and convenience for users. Discover its full functionality by downloading the free user manual from our website.

Share
Download
background image

Note

The remain open duration should be between 0 and 1440 minutes. By default, the remain

open duration is 10 minutes.

Disable Remaining Open after First Person

Disable the function of first person in, namely normal authentication.

Authorization by First Person

All authentications (except for the authentications of super card, super password, duress

card, and duress code) are allowed only after the first person authorization.

Note

You can authenticate by the first person again to disable the first person mode.

4. Click Add on the First Person List panel.

5. Select person(s) in the left list and the person(s) will be add to the selected persons as the first

person(s) of the doors.
The added first person(s) will list in the First Person List

6. Optional: Select a first person from the list and click Delete to remove the person from the first

person list.

7. Click Save.

6.7.7 Configure Anti-Passback

The anti-passback feature is designed to minimizes the misuse or fraudulent use of access

credentials such as passing back card to an unauthorized person, or tailed access. The anti-

passback function establishes a specific sequence in which access credentials must be used in

order to grant access. You can set the sequence according to the actual path via the client and if

the person uses the credential in wrong sequence, you can also reset the anti-password records.
Before You Start

Enable the anti-passing back function of the access control device.
Perform this task when you want to configure the anti-passing back for the access control device.
Steps

Note

Either the anti-passing back or multi-door interlocking function can be configured for an access

control device at the same time. For the configuration of multi-door interlocking, refer to .

1. Click Access Control → Advanced Function → Anti-Passback to enter the Anti-Passpack Settings

page.

2. Select an access control device on the left panel.

3. Select a card reader as the beginning of the path in the First Card Reader field.

DS-K3B501S Series Swing Barrier User Manual

72

Summary of Contents for DS-K3B501S Series





















































































































Reviews:

No comments

Related manuals for DS-K3B501S Series

FAAC B680H Instruction Manual preview
B680H
Brand: FAAC Pages: 166

Brands by name

Popular brands

Load more brands