manualshive.com logo in svg

HIKVISION DS-K3B501S Series, User Manual

The HIKVISION DS-K3B501S Series is an advanced security door controller designed to enhance access control systems. This intelligent device ensures maximum security and convenience for users. Discover its full functionality by downloading the free user manual from our website.

Share
Download
background image

Status of the device becomes Active after successful activation.

5. Modify IP address of the device.

1) Select the device.

2) Change the device IP address to the same subnet as your computer by either modifying the

IP address manually or checking Enable DHCP.

3) Input the admin password and click Modify to activate your IP address modification.

5.2 Activate Device via Client Software

For some devices, you are required to create the password to activate them before they can be

added to the software and work properly.
Steps

Note

This function should be supported by the device.

1. Enter the Device Management page.

2. Click   on the right of Device Management and select Device.

3. Click Online Device to show the online device area.

The searched online devices are displayed in the list.

4. Check the device status (shown on Security Level column) and select an inactive device.

5. Click Activate to open the Activation dialog.

6. Create a password in the password field, and confirm the password.

Caution

The password strength of the device can be automatically checked. We highly recommend you

change the password of your own choosing (using a minimum of 8 characters, including at least

DS-K3B501S Series Swing Barrier User Manual

29

Summary of Contents for DS-K3B501S Series





















































































































Reviews:

No comments

Related manuals for DS-K3B501S Series

Brands by name

Popular brands

Load more brands