manualshive.com logo in svg

HIKVISION DS-K3B501S Series, User Manual

Share
Download
HIKVISION DS-K3B501S Series User Manual Download Page 75

Configure Parameters for Card Reader

After adding the access control device, you can configure its card reader parameters.
Steps

1. Click Access Control → Advanced Function → Device Parameter .

2. In the device list on the left, click   to expand the door, select a card reader and you can edit

the card reader's parameters on the right.

3. Edit the card reader basic parameters in the Basic Information page.

Note

The displayed parameters may vary for different access control devices. There are part of

parameters listed as follows. Refer to the user manual of the device for more details.

Name

Edit the card reader name as desired.

Minimum Card Swiping Interval

If the interval between card swiping of the same card is less than the set value, the card

swiping is invalid. You can set it as 0 to 255.

Alarm of Max. Failed Attempts

Enable to report alarm when the card reading attempts reach the set value.

Card Reader Type/Card Reader Description

Get card reader type and description. They are read-only.

4. Optional: Some of the following parameters are not listed in the Basic Information page, click

More to edit the parameters.
Enable Card Reader

If enabling the function, user can present card on the card reader. If disabling the function,

the card reader for entrance cannot be used.

OK LED Polarity/Error LED Polarity/Buzzer Polarity

Set OK LED Polarity/Error LED Polarity/Buzzer LED Polarity of main board according to the

card reader parameters. Generally, adopts the default settings.

Buzzing Time

Set the card reader buzzing time. The available time ranges from 0 to 5,999s. 0 represents

continuous buzzing.

Max. Interval When Entering PWD

When you inputting the password on the card reader, if the interval between pressing two

digits is larger than the set value, the digits you pressed before will be cleared automatically.

Tampering Detection

Enable the anti-tamper detection for the card reader.

DS-K3B501S Series Swing Barrier User Manual

62

Summary of Contents for DS-K3B501S Series





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands