HIKVISION DS-K3B501S Series User Manual Download

Page: 76 / 116

Communicate with Controller Every

When the access control device cannot connect with the card reader for longer than the set

time, the card reader will turn offline automatically.

Fingerprint Recognition Level

Select the fingerprint recognition level in the drop-down list.

5. Click OK.

6. Optional: Click Copy to, and then select the card reader(s) to copy the parameters in the page

to the selected card reader(s).

Configure Parameters for Alarm Output

After adding the access control device, if the device links to alarm outputs, you can configure the

parameters.
Steps

1. Click Access Control → Advanced Function → Device Parameter to enter access control

parameter configuration page.

2. In the device list on the left, click to expand the door, select an alarm input and you can edit

the alarm input's parameters on the right.

3. Set the alarm output parameters.

Name

Edit the card reader name as desired.

Alarm Output Active Time

How long the alarm output will last after triggered.

4. Click OK.

5. Optional: Set the switch on the upper right corner to ON to trigger the alarm output.

Configure Parameters for Lane Controller

After adding the lane controller to the client, you can configure its parameters for passing through

the lane.
Steps

1. Click Access Control → Advanced Function → Device Parameter to enter Parameter Settings

page.

2. In the device list on the left, select a lane controller and you can edit the lane controller's

parameters on the right.

3. Edit the parameters.

Passing Mode

Select the controller which will control the barrier status of the device.

DS-K3B501S Series Swing Barrier User Manual

Summary of Contents for DS-K3B501S Series





















































































































Search results

Summary of Contents for DS-K3B501S Series

Reviews:

Related manuals for DS-K3B501S Series

Brands by name

Popular brands

HIKVISION DS-K3B501S Series, User Manual

Search results

Summary of Contents for DS-K3B501S Series

Reviews:

Related manuals for DS-K3B501S Series

Brands by name

Popular brands