HIKVISION DS-K3B501S Series User Manual Download

Page: 96 / 116

3) View the related picture, detail description and handing records of the event.

4) Optional: Hover the cursor on the related picture, and then click the download icon on the

upper-right corner of the picture to download it to the local PC. You can set the saving path

manually.

5. Optional: Perform the following operations if necessary.

Handle Single Event

Click Handle to enter the processing suggestion, and then click

Commit.

Note

After an event is handled, the Handle button will become Add

Remark, click Add Remark to add more remarks for this handled

event.

Handle Events in a

Batch

Select events that need to be processed, and then click Handle in

Batch. Enter the processing suggestion, and then click Commit.

Enable/Disable

Alarm Audio

Click Enable Audio/Disable Audio to enable/disable the audio of

the event.

Select the Latest

Event Automatically

Check Auto-Select Latest Event to select the latest event

automatically and the event information details is displayed.

Clear Events

Click Clear to clear the all the events in the event list.

Send Email

Select an event and then click Send Email, and the information

details of this event will be sent by email.

Note

You should configure the email parameters first, see Set Email

Parameters in the user manual of client software for details.

6.10.3 Search Historical Events

In the Event Search module of the event center page, you can search the historical events via time,

device type, and other conditions according to the specified device type, and then process the

events.
Before You Start

Enable receiving events from devices before the client can receive event information from the

device,see Enable Receiving Event from Devices for details.
Steps

1. Click Event Center → Event Search to enter the event search page.

DS-K3B501S Series Swing Barrier User Manual

Summary of Contents for DS-K3B501S Series





















































































































Search results

Summary of Contents for DS-K3B501S Series

Reviews:

Related manuals for DS-K3B501S Series

Brands by name

Popular brands

HIKVISION DS-K3B501S Series, User Manual

Search results

Summary of Contents for DS-K3B501S Series

Reviews:

Related manuals for DS-K3B501S Series

Brands by name

Popular brands