HIKVISION DS-K3B501S Series Page 79 User Manual Download

Page: 79 / 116

Note

Up to 8 time durations can be set to one holiday period.

5) Perform the following operations to edit the time durations.

• Move the cursor to the time duration and drag the time duration on the timeline bar to

the desired position when the cursor turns to .

• Click the time duration and directly edit the start/end time in the appeared dialog.

• Move the cursor to the start or the end of time duration and drag to lengthen or shorten

the time duration when the cursor turns to

6) Optional: Select the time duration(s) that need to be deleted, and then click in the

Operation column to delete the selected time duration(s).

7) Optional: Click in the Operation column to clear all the time duration(s) in the time bar.

8) Optional: Click in the Operation column to delete this added holiday period from the

holiday list.

9) Click Save.

5. Optional: Click Copy to to copy the door status settings of this door to other door(s).

6.7.3 Configure Multi-Factor Authentication

You can manage the persons by group and set the authentication for multiple persons of one

access control point (door).
Before You Start

Set access group and apply the access group to the access control device. For details, refer to Set

Access Group to Assign Access Authorization to Persons .
Perform this task when you want to set authentications for multiple cards of one access control

point (door).
Steps

1. Click Access Control → Advanced Function → Multi-Factor Auth .

2. Select an access control device in device list on the left panel.

3. Add a person/card group for the access control device.

1) Click Add on the right panel.

2) Create a name for the group as desired.

3) Specify the start time and end time of the effective period for the person/card group.

4) Select members(s) and card(s) in the Available list, and the selected member(s) and card(s)

will be added to the Selected list.

Note

Make sure you have issue card to the person.

Make sure you have set access group and apply the access group to the access control device

successfully.

5) Click Save.

6) Optional: Select the person/card group(s), and then click Delete to delete it(them).

DS-K3B501S Series Swing Barrier User Manual

Summary of Contents for DS-K3B501S Series





















































































































Search results

Summary of Contents for DS-K3B501S Series

Reviews:

Related manuals for DS-K3B501S Series

Brands by name

Popular brands

HIKVISION DS-K3B501S Series, User Manual

Search results

Summary of Contents for DS-K3B501S Series

Reviews:

Related manuals for DS-K3B501S Series

Brands by name

Popular brands