HIKVISION DS-K3B501S Series User Manual Download

Page: 97 / 116

Figure 6-13 Search History Event

2. Set the filter conditions to display the required events only.

Time

The client time when the event starts.

Search by

Group: Search the events occurred on the resources in the selected group.
Device: Search the events occurred on the selected device.

Device Type

The type of device that occurred the event.
All

All the device types, and you can set the following filter conditions: group, priority, and

status.

Video Intercom

For the events of video intercom, you need to select searching scope: All Record and Only

Unlocking.
• All Records: You can filter the events from all the video intercom events, and you need

to set the following filter conditions: device, priority, status.

• Only Unlocking: You can filter the events from all the video intercom unlocking events,

and you need to set the following filter conditions: device, unlocking type.

Access Control

For the events of access control, you can set the following filter conditions: device,

priority, status, event type, card reader type, person name, card no., organization.

DS-K3B501S Series Swing Barrier User Manual

Summary of Contents for DS-K3B501S Series





















































































































Search results

Summary of Contents for DS-K3B501S Series

Reviews:

Related manuals for DS-K3B501S Series

Brands by name

Popular brands

HIKVISION DS-K3B501S Series, User Manual

Search results

Summary of Contents for DS-K3B501S Series

Reviews:

Related manuals for DS-K3B501S Series

Brands by name

Popular brands