DS-6700HUHI-K Series Encoder User Manual
84
Chapter 12
Log Search, Maintenance and
Security Settings
12.1
Searching Log
Purpose
The operation, alarm, exception and information of the device can be stored in log files, which can be viewed and
exported at any time.
Before you start
The log function can be realized only when the encoder is connected with HDD or network disk. And make sure
the HDD or network disk has been initialized for the first time to use
.
Steps:
1.
Go to
Configuration > System > Maintenance > Log
.
2.
Set the log search conditions to refine your search, including the
Major Type
,
Minor Type
,
Start Time
and
End Time
.
3.
Click
Search
to start searching log files.
4.
The matched log files will be displayed on the list shown below.
Up to 2000 log files can be displayed each time.
Figure 12. 1
Search Log