DS-6700HUHI-K Series Encoder User Manual
70
9.2
Configuring Net HDD
For the models with SATA disks connected, the configuration of network disk is selectable.
Before you start:
1.
The network storage device is available within the network and is properly connected.
2.
The network storage device is configured with NAS or IP SAN mode (please refer to the User Manual of IP
SAN/NAS).
Steps:
1.
Go to
Configuration
>
Storage
>
Storage Management
>
Net HDD
.
Figure 9. 3
Net HDD
2.
You can search the available NAS/IP SAN disks in the designated storage sever by entering its IP address.
1)
Select the type to NAS or IP SAN.
2)
Enter the IP address of the designated storage server.
3)
Click
Search
and the available NAS or IP SAN disks in this storage server will be listed below.
4)
Select the searched NAS or IP SAN disk from the list and click
OK
to add it.
Figure 9. 4
Search Net HDD