DS-6700HUHI-K Series Encoder User Manual
49
Chapter 7
Event Settings
7.1
Configuring Basic Events
Purpose:
You can configure the basic events by following the instructions in this section, including motion detection, video
tampering, alarm input, alarm output, and exception, etc. These events can trigger the linkage methods, such as
Notify Surveillance Center, Send Email, Trigger Alarm Output, etc.
7.1.1
Configuring Motion Detection
Purpose
:
Motion detection is a feature which can alert the personnel and record the video for the motion occurred in the
surveillance scene.
Steps:
1.
Go to
Configuration> Event > Basic Event > Motion
to enter the motion detection settings page.
2.
Select the camera to configure the motion detection.
3.
Check
Enable Motion Detection
.
4.
(Optional) Check
Enable Dynamic Analysis for Motion
. When this feature is enabled, the motion detection
triggered frame (green) for the moving targets in the motion detection area will be displayed on the live
video.
5.
Set the motion detection area.
(1)
Click
Area Settings
tab.